Local Service near Overstrand 

---

1.      Are electric shower powerful?

Electric showers can be powerful, but their performance largely depends on their power rating (measured in kilowatts, or kW) and the incoming water temperature. Here's a detailed look at their power and performance:

Power Ratings and Performance

1. Low Power (7.5kW - 8.5kW):
• Suitable for areas with milder climates or where hot water demand is lower.
• Provides a moderate water flow and may struggle to maintain a strong flow during colder months when the incoming water temperature is lower.
2. Mid-Range Power (8.5kW - 9.5kW):
• Offers a better balance between performance and energy consumption.
• Generally provides a good water flow and consistent temperature control for most users.
3. High Power (9.5kW - 10.8kW):
• Delivers the most powerful performance with strong water flow and better temperature control.
• Ideal for areas with cold incoming water or for users who prefer a more vigorous shower experience.
• Higher power units can maintain a comfortable water temperature even in colder weather.

2.      Who provide electric shower installation services?

Electric shower installation services can be provided by several types of professionals and companies. Here are the main options:

Electricians

Qualified Electricians: Certified electricians are essential for the electrical aspects of the installation. They ensure that the shower is connected safely to the electrical supply and that all wiring complies with local building codes. They can also install necessary components like dedicated circuits and RCDs (Residual Current Devices).

Plumbers

Qualified Plumbers: Plumbers are required to handle the plumbing connections, ensuring that the shower is properly connected to the cold water supply and that there are no leaks. They can also assist with any necessary adjustments to the existing plumbing setup.

Specialized Companies

Bathroom Installation Companies: Many companies specialize in bathroom renovations and installations. These companies typically have both electricians and plumbers on staff, providing a comprehensive service that includes installing electric showers.

Retailers

Retailers and Home Improvement Stores: Some retailers that sell electric showers also offer installation services. For example, large home improvement stores like B&Q, Homebase, and Wickes in the UK often provide installation services either through their in-house teams or via partnerships with local tradespeople.

Online Service Platforms

Online Service Platforms: Websites like Checkatrade, Rated People, MyBuilder, and TrustATrader allow you to find and hire local tradespeople, including electricians and plumbers, who can install electric showers. These platforms often feature reviews and ratings from previous customers to help you choose a reliable professional.

Local Handyman Services

Local Handyman Services: Some experienced handymen offer electric shower installation as part of their services. While they may not be specialized in electrical or plumbing work, those with the necessary qualifications and experience can provide a cost-effective solution.

Examples of Providers in the UK

1. British Gas: Offers a wide range of home services, including electric shower installation.
2. Dyno: Part of British Gas, Dyno provides plumbing and electrical services, including shower installations.
3. Pimlico Plumbers: A well-known company offering comprehensive plumbing and electrical services in London and surrounding areas.
4. Local Electricians and Plumbers: Look for local, certified professionals through directories or recommendations.

Steps to Find a Provider

1. Check Credentials: Ensure the electrician and plumber are certified and have experience with electric shower installations.
2. Get Multiple Quotes: Obtain quotes from several providers to compare prices and services.
3. Read Reviews: Look for reviews and testimonials from previous customers to gauge the reliability and quality of their work.
4. Ask for Recommendations: Ask friends, family, or neighbors for recommendations if they have had similar work done.

By considering these options and taking the necessary steps to verify credentials and compare services, you can find a reliable professional to install your electric shower safely and efficiently.

3.      What is the method of electric shower installation from start to finish?

Installing an electric shower involves several steps, from preparation to final testing. Here’s a comprehensive guide to the method of electric shower installation from start to finish:

Tools and Materials Needed:

• Electric shower unit
• Screwdrivers
• Drill and drill bits
• Spirit level
• Adjustable wrench
• Pipe cutter
• Cable (suitable for the shower’s power rating)
• Circuit breaker (if required)
• Residual Current Device (RCD)
• Rawl plugs and screws
• Electrical tester
• PTFE tape
• Isolation valve

Step-by-Step Installation Process:

1. Preparation:

• Turn Off Power and Water Supply: Ensure the electrical supply is turned off at the main circuit breaker and the water supply is shut off.
• Check Water Pressure: Verify that the incoming water pressure meets the electric shower’s requirements. Most showers require a minimum pressure of 1.0 bar.
• Choose Location: Select a location for the shower unit that is within reach of both the water and electrical supplies. The shower should be installed at a comfortable height for users.

2. Install the Shower Unit:

• Mark Fixing Points: Hold the shower unit against the wall and mark the fixing points using a pencil.
• Drill Holes: Drill the holes at the marked points and insert rawl plugs.
• Mount the Unit: Secure the shower unit to the wall using screws.

3. Plumbing Connections:

• Connect Cold Water Supply: Use a pipe cutter to cut the cold water supply pipe and fit an isolation valve.
• Fit the Water Inlet: Connect the cold water supply to the shower’s water inlet, using PTFE tape to ensure a watertight seal.
• Secure the Connection: Tighten the connections with an adjustable wrench, ensuring no leaks.

4. Electrical Connections:

• Run the Electrical Cable: Run a suitable electrical cable (based on the power rating of the shower) from the consumer unit to the shower location. The cable should be routed through walls or conduit as required.
• Install a Circuit Breaker: If not already present, install a dedicated circuit breaker for the shower at the consumer unit.
• Install an RCD: Ensure the circuit is protected by an RCD to provide additional safety.
• Connect the Cable to the Shower Unit: Strip the insulation from the end of the cable and connect the live (brown), neutral (blue), and earth (green/yellow) wires to the corresponding terminals in the shower unit.
• Secure the Wiring: Make sure all connections are tight and secure.

5. Final Setup and Testing:

• Attach the Showerhead: Connect the shower hose and showerhead to the outlet of the shower unit.
• Check for Leaks: Slowly turn on the water supply and check all connections for leaks. Tighten any connections if necessary.
• Test Electrical Connections: Use an electrical tester to ensure there are no live wires exposed and that all connections are correct.
• Turn On Power: Turn on the power supply at the main circuit breaker.

6. Commissioning the Shower:

• Initial Run: Turn on the shower and run it on a low temperature setting initially to allow air to escape from the system.
• Adjust Temperature: Gradually increase the temperature and check the shower’s performance. Ensure the temperature controls are working correctly.
• Check Safety Features: Test the RCD to ensure it trips correctly in the event of a fault.

Safety Considerations:

• Qualified Professionals: Electrical work should be carried out by a qualified electrician, and plumbing work by a qualified plumber if you're not experienced with these tasks.
• Local Regulations: Ensure that the installation complies with local building and electrical regulations.

By following these steps, you can ensure a safe and effective installation of an electric shower, providing reliable performance and compliance with safety standards.